Complete Control

Information about Complete Control products

Articles

Can't Connect or Download - MX-780, MX-790, MX-890 and MX-990
Problem:  Can't Connect or Download - MX-780, MX-790, MX-890 and MX-990 handheld remote controls In some cases, a computer or laptop may not be able to connect or download to the remotes listed above. This can be especially true if it ...
Can't Connect or Download - MX-980, MX-5000 and MX-6000
Problem:  Can't Connect or Download - MX-980, MX-5000 and MX-6000 Handheld Remote Controls In some cases, a computer or laptop may not be able to connect or download to the remotes listed above. This can be especially true if it is a n...
Lost Program After Changing Batteries MX-900, MX-450, MX-350
Symptom : Replaced batteries in the remote and lost  the   programming.  This can occur in the MX-350 , MX-450 and MX-900 .  If this happens please follow the steps below: Solution: Remove all the batteries  fro...
How To Convert an MX-780 File Into an MX-790 File
How To Convert an MX-780 File Into an MX-790 File The newer MX-790 remote will allow the use of existing MX-780 project files with only slight updating required. This will allow the use of the newer remote for upgrades or replacement situations...
Importing Existing Devices into a new CCP File
Importing devices from another CCP program can expedite the programming process so that devices do not have to be re-programmed or re-learned.  Importing a device allows the programmer to import only the SAME in-like  controller from anot...
Factory Default Complete Control Remotes
A  factory reset , also known as master  reset , is a software restore of an electronic device to its original system state by erasing all of the information stored on the device in an attempt to restore the device's software ...
Teaching Dish Network Boxes to Work with URC MX Remotes
Dish Network Boxes require a specified IR address/ID.  If a user adds additional Dish Network remotes to an already installed system, the URC IR frequency must be re-addressed.   To learn a URC MX remote frequency, follow the st...
Error Message: MXL File Missing or MSXML May not be installed
Symptom: Error Message:   MXL File Missing or MSXML May not be installed.   This error occurs when specified Microsoft soft ware is not currently installed on the programming PC. Solution : ...
Understanding the URC Complete Control Software Login
Understanding the URC Complete Control Software Login URC Complete Control software provide countless options to configure and optimize settings to achieve performance and flexibility for almost any application. This article will help with U n...
Mac Parallels and USB Connection Issues
Many installers and programmers use a Mac laptop or desktop computer with Parallels running a Windows OS (Operating System). A Windows OS is required to run various URC programming software for the Complete Control and Total Control product lineups....
Updating the PIR-1 Firmware
When connecting a PIR-1 to URC Accelerator or Complete Control Program software, it requires a Firmware Update, however, when the steps are followed, the update fails every time. The following article details the process to update the firmware ...
How to Use MX-series Remotes With Crestron
How to Use MX-series Remotes With Crestron© In some cases, it may be possible to use a URC MX-series remote control via RF (418MHz) to operate a Crestron control system. Additional Crestron© hardware is required in addition to the URC...