Rapid Start/Burst Mode: Vivido & Cooper Aspire Z-Wave Lighting Devices

Rapid Start feature

This feature ensures that LED/CFL lights turn on when the dimmer preset level is low. With this setting enabled, the lights may momentarily be brighter than the preset level (less than one second) and then dim down to the preset level.

NOTE:  Depending on the type of light used, this feature may not be needed as all LED bulbs differ.

Steps to enable/disable the feature:

  1. Turn lights ON.
  2. Press and hold the on/off button for 10 seconds until the blue dimmer LEDs flash for the 3 times, then release the button.

This inverts the Rapid start feature.  So if it was previously enabled, the it disables it, and vice versa.

Was this article helpful?
Thank you for your feedback!
User Icon

Thank you! Your comment has been submitted for approval.