Updating the PIR-1 Firmware

When connecting a PIR-1 to URC Accelerator or Complete Control Program software, it requires a Firmware Update, however, when the steps are followed, the update fails every time.

The following article details the process to update the firmware of the PIR-1 Professional IR learner.

Updating the PIR-1 Firmware

Symptom:  When connecting a PIR-1 to URC Accelerator or Complete Control Program software, it requires a Firmware Update, however, when the steps are followed, the update fails every time.

Reason:  The chipset within the PIR-1 needs to be updated to work with the latest version of URC software.

Solution:

Here are the steps to resolving this issue:

1. Go to FDTI (chip manufacturer) website: www.FTDIchip.com
2. In the Left-hand column select DRIVERS
   1. In the DRIVER section, select D2XX Drivers
3. In the software chart, find the Windows section
   1. Select either x86 or x64- based on your PC processor type
4. UnZip downloaded file to a designated location/folder
5. Go to Windows Device Manager on your PC
   1. Select the COM Port section
   2. Right-click on USB to Serial Adaptor
   3. Perform Driver Update for USB to Serial Adaptor

              d. Select BROWSE for FOLDER and direct Device Manager to previously designated folder

6. Open URC software and try the  PIR-1Firmware Update again
   
   

Thanks to Hopeton A. Barnett in URC Tech support for this tip.

Additional Information & Resources: