URC Lighting: LT-3300 Specifications
The URC LT-3300 Configurable Dimmer or Switch is software configurable to be used as either a dimmer or a switch.
This article details the product specifications for the LT-3300 Smart, Configurable Dimmer or Switch.
Note: URC recommends using a licensed electrician for any high-voltage device installations!
LT-3300 Specifications
| SKU: | LT-3300-WH | |
| UPC: | 656787-705296 | |
| Default Color: | White | Color Change Kit Available to Change Paddle Color (8 Available Colors) LT-3301-WH (white) LT-3301-AL (almond) LT-3301-LA (light almond) LT-3301-BL (black) LT-3301-BR (brown) LT-3301-GR (gray) LT-3301-IV (ivory) LT-3301-RD (red) |
| RF Technology: | Z-Wave® Plus LR [S2 Encryption] | |
| RF Frequency: | 908.42 MHz | |
| Z-Wave Chip: | 800 Series | |
| Power: | 120 Volt AC / 60Hz | |
| Usage: | Indoor, not to be used with Fans or Motors | |
| Installation: | Neutral and Non-Neutral Installation | |
| Max Load/Wattage: |
| |
| ||
| Min Load/Wattage: |
| |
| ||
| Dimensions: |
| |
| Weight: | 4 oz / 28.34g | |
| Operating Temperature Range: | 32-95 °F (0-35 °C) | |
| System: | Total Control® Professional Programming Required | |
| Approval: | UL Listed / FCC / IC / Z-Wave Plus™ | |
What's in the Box: | URC Light Dimmer/Switch | |
Sold Separately: | TRF-ZW10 required |
Product Images:
LT-3300-WH Front View
LT-3300 Rear View
LT-3300-WH Installed View
LT-3300 Physical Device Controls and Markings:
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Each module is designed to act as a repeater, which will re-transmit a radio frequency (RF) signal by routing the signal around obstacles and radio dead spots to ensure that the signal is received at its intended destination. The LT-3300 is a security enabled Z-Wave Plus™ device. A security enabled Z-Wave Plus controller must be used in order to fully utilize the product.
Note: URC recommends using a licensed electrician for any high-voltage device installations!
Lighting Bypass:
The Lutron LUT-MLC is a popular device used for this purpose. You can find details and purchase here: LUT-MLC on Amazon
The Jasco Lighting Bypass 52327 can also be used for this purpose. You can find details and purchase here: Jasco 52327 on Amazon
The Aeotec Lighting Bypass can also be used for this purpose. You can find details and purchase here: Aeotec Bypass on Amazon
Additional Information & Resources:
Please refer to the article URC Dimmer (LT-3100) Parameters for additional information on setting device parameters.
Please refer to the article URC Switch (LT-3200) Parameters for additional information on setting device parameters.
Please refer to the article URC Dimmer/Switch (LT-3300) Parameters for additional information on setting device parameters.
Please refer to the article URC Dimmer/Switch (LT-3300) Specifications for additional information for this device.
Please refer to the article LT-3300 Single Pole Connection Examples for additional information for this device.
Please refer to the article LT-3300 3-Way Connection Examples for additional information for this device.
Please refer to the section on URC Lighting for additional information using URC Lighting in Accelerator 3.
URC Dimmer/Switch LT-3300 Spec Sheet
To learn more about Accelerator 3 configuration and programming, please see the Accelerator 3 online Programming Guide.
