New Articles

  1. Using HDA Audio with a Netgear M4250-10G2XF-PoE+ Network Switch

    Created On: 05/03/2022 in Accelerator 3 HDA
    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. In most cases, the URC HDA-SW5 switch capacity is sufficient for most installations. ...

  2. Using HDA Audio with a L-Acoustics LS10 AVB Network Switch

    Created On: 05/02/2022 in Accelerator 3 HDA
    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. In most cases, the URC HDA-SW5 switch capacity is sufficient for most installations. ...

  3. URC Device Power Dissipation in BTU's

    Created On: 03/09/2022 in Accelerator 3
    URC Device Power Dissipation in BTU's Heat losses are the thermal emissions from an amplifier while it is operating. It comes from dissipated waste power in the form of heat. This heat output is usually measured in BTU 's ( British Thermal Un...

  4. Using HDA Audio with Network VLAN Settings

    Created On: 03/08/2022 in Accelerator 3 HDA
    This article provides integration information for using HDA Audio with Network VLAN Settings used in routers and managed network switches. URC HDA devices use “ AVB ” ( Audio Video Bridging ) to share audio streams among other HDA products on a n...

  5. URC Lighting: LT-3100 Dimmer Parameters

    Created On: 02/21/2022 in Accelerator 3 URC Lighting
    URC Dimmer Parameters ( URC Lighting Dimmer LT-3100) Parameters refer to the number of tweakable settings that determine how a Z-Wave device functions. Depending on the device, you can adjust how the device performs.  Anything from LED color, to...

  6. URC Lighting: LT-3200 Switch Parameters

    Created On: 02/21/2022 in Accelerator 3 URC Lighting
    URC Switch Parameters ( URC Lighting Switch LT-3200) Parameters refer to the number of tweakable settings that determine how a Z-Wave device functions. Depending on the device, you can adjust how the device performs.  Anything from LED color, to...

  7. How to Export Driver Files

    Created On: 02/18/2022 in Accelerator 3 Software Settings
    How to Export Driver Files URC Accelerator 3 software provides an option for exporting driver files from an existing project file. Driver files are embedded in the project file when devices are added to the project tree. Exporting these drive...

  8. Managing Your URC Dealer Offsite Programming Account (www.urcmcs.com)

    Created On: 02/17/2022
    Using   www.urcmcs.com , dealers (specifically, Offsite Programing ADMINISTRATORS ) now have access to the all-new “ Jobs Browser ” feature. T his feature was previously available at www.urcrms.com but that portal has been retired and the fe...

  9. HDA Zone Volume Response vs DMS

    Created On: 02/16/2022 in Accelerator 3 HDA
    The following article will help give you a better understanding of the HDA Zone Volume Response vs DMS on various HDA devices. Unlike the DMS Series Amplifiers, all HDA Amplifiers use a “Linear” Volume Scale (also known as “Linear Taper”) for a ...

  10. Using HDA Audio with a PreSonus SW5E Network Switch

    Created On: 02/10/2022 in Accelerator 3 HDA
    The following article details the setup needed to use the PreSonus SW5E Network Switch  with URC HDA Audio.  The PreSonus SW5E Network Switch is an AVB-enabled switch that supports five RJ45 ports (the ports support locking XLR Ethernet c...