Updated Articles

  1. Setting Simple IP Control for Sony TV's

    Setting Simple IP Control for Sony TV's The following article details how to configure a Sony TV for " Simple IP Control ". Note: (as of 1-4-24): There appears to be (known) issue with the new Sony XR A95L-series and the discreet IR codes fro...
  2. Converting Audio Files for Use In An HDA System

    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. The following article provides information related to c onverting .mp3 files to ...
  3. Using Sound and Audio Files in HDA

    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. The following article will give you general information related to using Sound and A...
  4. Using HDA Audio with Motu AVB Switches

    The following article details the setup needed to use the Motu AVB Switch with URC HDA Audio.  The Motu AVB Switch tested is shown in the picture above and is the latest switch model. Older Motu AVB Switches were not tested. The Motu A...
  5. Understanding the HDA LED Status Indicators

    Understanding the HDA LED Status Indicators This article provides information on the LED status indicators for the various HDA audio distribution devices. Note: This article  applies to the HDA-IO, HDA-130, HDA-8100, HDA-4100 and HDA-1600. The...
  6.  HDA Unit Status LED Blinking Red After a Download

    URC HDA devices may experience a blinking red status LED that can occur when a download issue occurs. The following article provides the reasons why this blinking red status LED may happen and the process for troubleshooting, resetting, and det...
  7. Using the Bond Bridge with Automate Pulse 2 Shades

    Using the Bond Bridge with Automate Pulse 2 Shades This article details additional steps to include additional information required to be entered into the URC 'parameters' (Step #7 Properties Manager>Module Parameters) for the proper operation ...
  8. Lutron Unified Module with RadioRA3 and Homeworks QSX

    Application Note: When integrating with RadioRA3 and Homeworks QSX (Not QS), you only need to use the Lutron Unified Control Two-Way Module . It is not necessary to use the Lutron Telnet Expansion Two-Way Module at all ( https://urcportal.com/M...
  9. Controlling the eStream4K Device Using IR

    Many cable providers are now supplying end-users with an Android TV-based  device in lieu of a standard cable box for their cable TV content delivery. These devices are typically supplied with a Bluetooth remote control. However, in most situations...
  10. Public vs. Private Network Wi-Fi Settings

    Public vs. Private Network Wi-Fi Settings This article details the steps required to change the default Wi-Fi Network Settings for your laptop or PC. The Accelerator 3 software requires that a Private network is enabled  allowing for Accelerat...