-
Digital Video Recorder (DVR):
Uses analog cameras
Easier to install
Analog cameras cannot be more than 1000 ft away from DVR
Network Video Recorder:
Records over the network
Uses IP cameras (POE)
...
-
Many 3rd Party Cameras integrated with a Total Control System can be viewed from any of the fully graphical user interfaces (TRC-1280, TC-1080/820, TKP-7000/5500,7600), iOS, Android) To view the cameras on the interfaces, there are some required...
-
Personal Music files can be searched and played on the SNP-2. These are the steps to add a music folder to the Streaming Network Player.
Select Settings .
Select My Music Manager .
...
-
This article outlines how to manually share music folders from a Mac.
Sharing music between the Mac and SNP-2 requires several steps; locating the username, sharing the Mac and sharing iTunes to communicate with the SNP-2 During th...
-
This article outlines how to manually share music folders from the PC on the Network
To share folders, a file path may be required as well as a username and password (this option can be disabled under advanced network settings), if con...
-
This article will cover setting up the THZ-100 to use an external sensor for temperature readings.
Add the THZ-100 to the project
Step 9: URC Subsystems and select URC Thermostats .
in the Remote Tem...
-
This article shows how to calibrate the touch screen of the TRC-1280 .
Hold down the main and select buttons simultaneously on the remote for approximately 5 second so enter the setup screen .
Select calibration .
A wind...
-
This article shows the steps for updating the PSX-2's firmware .
Using a web browser, access the PSX-2's interface by browsing to the local IP address of the device. The IP address can be found by discovering it in Step 6: Network Se...
-
Some Total Control devices use URC's proprietary URC 2.4GHz RF to communicate to the M aster S ystem C ontroller ( MSC ). Currently, the only MRX unit that has a built-in URC 2.4GHz RF transceiver is the MRX-10. This means the use of a TRF-...
-
The DMS-AV is a 7.2 surround sound processor and may require configuration to achieve best audio/video results. The following steps review the DMS-AV System tools used to configure the device properly.
Turn On the TV and set it to the...