Popular Articles

  1. Using the Audio Sensing Feature on HDA Devices

    Last Updated: 11/03/2022 in Accelerator 3 HDA
    URC HDA devices and Accelerator software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. One of those features is the audio sensing automation capabilities for ...

  2. Accelerator Macro Colors Explained

    Last Updated: 08/09/2023 in Accelerator 3 Software Programming
    URC Accelerator 3 software provides countless options to configure and optimize settings to achieve performance and flexibility for almost any application. In a URC Macro, activities and macros are displayed using different colors to signify their ...

  3. Using HDA Audio with a L-Acoustics LS10 AVB Network Switch

    Last Updated: 05/03/2022 in Accelerator 3 HDA
    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. In most cases, the URC HDA-SW5 switch capacity is sufficient for most installations. ...

  4. URC Ducking Event-Creating an Audio Override

    Last Updated: 11/17/2022 in Accelerator 3 HDA
    The following article details the Accelerator 3 software step-by-step process for creating a URC Amp Ducking Event  and using it as a Audio Override when using URC HDA audio. This example shows how to use a turntable to automatically override the...

  5. Lutron Unified Module with RadioRA3 and Homeworks QSX

    Last Updated: 08/09/2023 in Accelerator 3 3rd Party Information & Troubleshooting
    Application Note: When integrating with RadioRA3 and Homeworks QSX (Not QS), you only need to use the Lutron Unified Control Two-Way Module . It is not necessary to use the Lutron Telnet Expansion Two-Way Module at all ( https://urcportal.com/M...

  6. Using HDA Room Link Groups

    Last Updated: 06/11/2021 in Accelerator 3 HDA
    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. The following article provides a better understanding of using Room Link  Groups i...

  7. Manually Configuring the Advanced (Network) Settings for Gigabit Ethernet-enabled URC Devices

    Last Updated: 07/10/2023 in Accelerator 3 Software Settings
    Specific URC devices connected to advanced networking gear can sometimes cause issues when discovering and/or downloading during the programming process. If you are having issues discovering a device from within Step 6b: URC Devices, or the device ...

  8. How To Check Your MRX-8 for Total Control 2.0/TC 3 Compatibility

    Last Updated: 05/07/2021 in Total Control: Accelerator 1 & 2 MRX-8
    This article covers how to confirm if your MRX-8 is compatible with Total Control 2.0 & TC 3. All MRX-8 devices are compatible with Total Control Accelerator 1.0/2.0 & TC 3 and TC Flex 2. Additional Information & Resources: To chec...

  9. Logging Into Offsite Programming (Windows 11) Error 12157-TLS 1.0 Settings

    Last Updated: 06/06/2023 in Accelerator 3 Software Settings
    Accelerator 3 and Flex 2 have experienced some errors when trying to log into Offsite Programming when using Microsoft Windows 11 and on rare occasions, Windows 10.  This issue is related to Internet Properties settings for TLS 1.0. This also fixes...

  10. Using Sound and Audio Files in HDA

    Last Updated: 08/15/2023 in Accelerator 3 HDA
    URC HDA devices and software provide countless options to configure and optimize audio settings to achieve performance and flexibility for almost any application. The following article will give you general information related to using Sound and A...